Mass Transfer Lab

MASS TRANSFER LAB

SOLID-LIQUID EXTRACTION IN PACKED BED MT-105

This setup is designed to study the performance characteristics of Solvent extraction of a particular component from a packed bed of solid material. The apparatus allows study of such systems as water/inorganic salts, water/sugar bed, methylene chloride/vegetable oil etc. The glass column is fitted with SS mesh to support the solid material. The solvent is introduced near the bottom of the column and it flows upward counter-currently to the solids. A pump supplies the solvent and flow rate is monitored by means of a Rotameter. Solvent feed tank is kept in a bath fitted with heater and digital temperature controller is used to maintain the constant temperature.

Rating:
Contact Seller
X

Contact Seller

    • SCOPE_OF_EXPERIMENTATION
    • • To study the effect of various system parameters like, solvent temperature, solvent rate and particle size on the %age recovery of oil from solid.
    • Technical_Detail
    • Technical Detail Parameters
      Extraction Column Material Borosilicate Glass,
      Dia 80 mm (approx)
      Height 500 mm (approx)
      Solvent Flow Measurement By Rotameter
      Solvent Tank Made of Stainless Steel, Capacity 30 Ltrs. Double walled.
      Solvent Circulation By Magnetic Pump, made of Polypropylene for solvent.
      Maximum working temperature 60°C.
      Heater Nichrome wire heater.
      Receiving Tank Material Stainless Steel, Compatible capacity with sieve
      Temperature Sensor RTD PT-100 Type.
      Control Panel Compromises of
      Digital Temperature Controller PID Controller, 0-199.9°C (For Feed Tank)
      • With Standard make on/off switch, Mains Indicator etc.
      • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
      • The whole set-up should well designed and arranged on a rigid structure painted with industrial PU Paint.
    • ACCESSORIES
    • PDF
    • pdf file

EXTARCTION

MT-101           Liquid-Liquid Extraction in a Packed Tower
MT-102           York Scheibel’s Extraction Unit
MT-103           Spray Tower
MT-104           Soild-Liquid Extraction (Bonnotto Type)
MT-105           Soild-Liquid Extraction (Packed Bed Type)

ABSORPTION

MT-121           Absorption in Sieve Plate Column
MT-122           Absorption in Packed Bed
MT-123           Absorption in Wetted Wall Column

MISCELLANEOUS

MT-161           Wetted Wall Colum
MT-162           Vapour Liquid Equilibrium Set-Up
MT-163           Mass Transfer with & without chemical Reaction (Solid-Liquid)
MT-164           Experimental Water Cooling Tower
MT-165           Adsorption in Packed Bed

DISTILLATION

MT-111           Bubble Cap Distillation Column
MT-112           Sieve Plate Distillation Column
MT-113           Packed Bed Distillation Column
MT-114           Steam Distillation Set-Up
MT-115           Simple Batch Distillation

DIFFUSION

MT-131           Vapour in Air Diffusion Apparatus
MT-132           Solid in Air Diffusion Apparatus

CRYSTALLIZATION

MT-151           Batch Crystallizer
MT-152           Swenson Walker Crystallizer

DRYING

MT-141           Natural Draft Tray Dryer
MT-142           Forced Draft Tray Dryer
MT-143           Rotary Dryer
MT-144           Fluidized Bed Dryer