MECHANICAL OPERATION LAB
ROLL CRUSHER MO-102
The Lab setup is used to crush different sample and material. Two heavy Smooth faced chilled metal rolls turning on parallel horizontal axes are the working elements of the roll crusher. A hopper is provided at the top for feeding the material. Particles of feed caught between the rolls are broken in compression and drop out below. The rolls turn towards each other at the same speed. They have relatively narrow faces and are larger in diameter so that they can nip moderately large lumps. Loading bolts are provided for safety. The maximum size of the product is approximately equal to gap between the rolls & it can be adjusted by loading bolts.
-
Parameters
- SCOPE OF EXPERIMENT
- • To determine the efficiency of the crusher for crushing a material of known working index.
- Technical Detail
- Technical Detail Parameters Roll Material Chilled Steel Dia 200 mm Width 100 mm (approx) Drive 2 HP motor coupled with Reduction Gear Box to give 48-70 RPM Feed Hoper Suitable Capacity Max Feed Size 6-8 mm Product Size 1-2 mm Control Panel Compromises of Energy Measurement Electronic energy meter. Starter 2 HP, Single Phase. MCB For overload protection. • The set-up is fitted with required guards and product collection tray. • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus • The whole set-up should well designed and arranged on a rigid structure painted with industrial PU Paint.
- pdf file
-
Comments