MECHANICAL OPERATION LAB
GAYRATORY SIEVE SHAKER MO-115
Gyratory type shaker is driven by FHP motor through a reduction gear suitable to carry up to 7 sieves of 15 cm or 20 cm diameter. When clamped the sieve table does not rotate but it is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. In addition to the gyratory motion of the Shaker, there is an upward and downward movement ensuring that each square inch of the sieve is utilized. The whole mechanism runs in an oil bath. Complete with adopter for 20-cm diameter sieves. Suitable for use from 220/230 volts 50 Hz.AC supply. Test Sieves will be supplied at an extra cost. A time switch from 0 to 60 minutes is provided.
-
Parameters
- SCOPE OF EXPERIMENT
- Technical Detail
- Technical Detail Parameters Sieve Assembly Compatible to sieves of 20-cm dia. (for 6-7 sieves) Drive By ½ HP motor Control Panel Compromises of Standard make on off switch, Mains Indicator etc. • Special arrangement for setting time for shaking. • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.
- pdf file
-
Comments